6130 – 6140 TTV
The mid-size TTV Variable Tractor.
DEUTZ-FAHR has expanded its series offering with two exceptional models, the 6130 (126hp) and 6140 (136hp), both available with either TTV or Powershift transmissions.
From ploughing, sowing and cultivating to transporting, harvesting and front loader work, the 6 Series tractors are as versatile as your daily work is varied.
Like the 6 cylinder 6 Series, the high horsepower four-cylinder tractors come with powerful hydraulic systems, as well as a range of hydraulic attachment points at the front and rear.
Ultra-efficient FARMotion 3.8 litre engines (Tier 3) with an output from 126 to 136 HP (95 to 100 kW), ensure characteristically high performance and low fuel consumption.
- 126 - 136HP
- Powerful Hydraulic Systems
- FARMotion 3.8 litre engine
- Spacious cabin
- Easy to use TTV Variable Variable transmission
- Armrest control
Features
Powerful 4 Cylinder Engine
Designed specifically for use in the agricultural sector, the Deutz Fahr FARMotion engine delivers two power ratings for this series: 126 and 136hp variants. Power is generated from 4 cylinders in tandem with the latest engine technology such as common rail, automatic hydraulic valve tappet adjustment and self-tensioning drive belts. Electronic monitoring is another feature, ensuring fuel delivery and turbo boost pressures are maximised during engine load which results in better performance and reduced fuel consumption. No AdBlue nor DPF is required with this engine.
Sense Clutch Powershuttle
The 6 series 4 cylinder models are fitted with a wet clutch Powershuttle, enabling directional changes without the use of the clutch pedal. The sense clutch is the modulation control set by the operator on the shuttle lever, depending upon how responsive you want the shuttle. There are five factory settings to tailor shuttle movements to suit each and every task and condition.
Comfort and Ergonomics
Comfort and quiet are essential for drivers who work long days and nights. Deutz-Fahr addresses these important issues; the 6 Series models are fitted as standard with cab suspension that reduces noise and vibrations by upwards of 40% on previous versions. The work space of the 6 Series 4 cylinder tractors boasts an impressive design – all controls for the engine, transmission, power take-off, hydraulic control valves and lights, as well as the MMS for the InfoCentrePro, are within easy reach, built into the side console to the right of the driver.
TTV Variable Gearbox
The TTV variable transmission is available in both the 6130 and 6140 models. This transmission uses hydrostatic and mechanical technology to give infinite speed control. Speeds from 0 – 50 km/h (model determined) can be set using the MaxCom driving lever. Three driving strategies are available with Manual, Auto and PTO. Manual is similar to driving a normal gearbox tractor; however, the smart modes are Auto and PTO. Auto is used in tillage application where you can set the desired speed and the engine revs will adjust automatically depending on load. PTO mode is used for any PTO work; the engine revs are always constant and vehicle speed can be adjusted by the operator. Best of all, this transmission is easy to use.
Suspended Comfort Cabin
The 6 Series comes into its own with the deluxe, ergonomically designed E Class cabin. All models are fitted with a suspended cabin system. Two versions are available depending on model, with a Hydro Silent block - which uses a nitrogen dampening system - or the traditional spring type. Both versions reduce vibrations significantly and combined with a deluxe Grammer air seat a smooth ride is achieved. The cabin is also fitted with the InfoCentre Pro dash, cooler box and trainee seat. Test drive one today and be impressed.
Weight of a 6 Cylinder
Not that long ago it was possible to get a 6 cylinder tractor in a 100hp. This is much harder now, as most manufacturers start their 6 cylinder range at 140 hp. The team at Deutz Fahr recognise farmers need wheelbase and weight; every tractor needs physical weight to pull an implement as without it you cannot get power to the ground. The 6 Series weighs in between 5700kg to 5950kg, giving you the size of 6 cylinder but equipped with a 4 cylinder engine.
Closed Centre 120l/min Hydraulics
As this horsepower segment makes up the majority of tractors sold worldwide, operators need high flow hydraulics to do the job quickly and more efficiently. Whether using a loader or operating a seeder, the Deutz-Fahr 6 Series 4 cylinder range gives ample hydraulic power with its 120 L/min closed centre system. Depending on what the loader or implement needs, the pump will deliver hydraulic output as required and this can be also achieved at low engine revs. Four pairs of rear remotes are standard.
50km/h and Front Suspension Available
When choosing the 50 km/h option a front suspended axle comes as standard. The suspension system can be activated or deactivated at any time with a push of button inside the cabin. When the suspension is activated, there is +/- 45 mm travel at all times; this adjusts accordingly depending on load. The front suspended axle system combined with the cab suspension gives the operator an exceptionally smooth and comfortable ride.
BUYING TOOLS
Click below to find our more about the 6 TTV.
View Brochure6130 TTV Spec Sheet
6140 TTV Spec Sheet
